strip built sailboat plans
Strip planking is a form of carvel planking. the hull is built over forms using strips of wood, edge-glued, and edge fastened together. the strips are kept narrow so that there is very little shaping required. strips are usually a minimum of 1/2″ thick, with a maximum width of 1 1/2 times the thickness.. Strip planking wooden boats. the strip planking method of boat building could be described as a form of carvel planking. however, using strips is a form of construction which is much more suitable for the back yard builder. using this method a beautifully round bilged boat can be built with less skill and tools than with carvel.. The cosine wherry is 14′ 2″ long with a beam of 52″ and should weigh about 100 lbs when built to the plans. it is strip-planked with 1/4″ x 3/4″ red cedar, and sheathed inside and out with fiberglass cloth and epoxy. building time is at least 200 to 250 hours, though that will vary considerably depending on the builder’s experience. 
strip built sailboat plans
