wooden boat keel construction
This is the construction of the keel, keelson, skeg and sternpost. these solid oak parts form the bottom backbone of the boat. i started by cutting out the shape of keel and keelson by transfering the measurements from the lofting. the keel is the thicker piece which be on the very bottom of the boat.. If the bolt is badly corroded in the middle or at the joint between the ballast, the wood keel or the dead-wood there is a possibility that hammering might bend the bolt. how to build a boat, wooden boat building methods for the diy, backyard, self-builders explained, carvel, lapstrake and plywood.. The keel is the backbone of wooden boats. it connects to the stem at the front and back of the boat. keelson the inside part of the keel is the keelson. it helps make the boat more rigid and strengthens the connection of ribs and other parts of the boat to the keel. knee a piece of wood connecting and supporting two parts roughly at right angles.. 
wooden boat keel construction The gougeon brothers publication epoxyworks (quarterly) is a vast resource of info on building with wood epoxy. find all the back issues you can, plus read the ones available on their website. see epoxyworks #17 for info on the longitivity of boats built using wood epoxy techniques. the oldest examples are now approaching 40 years old.. If you are envisioning a three part structural keel you are building a weak boat for very little saving in time or effort. it really is quite difficult to build an ugly wooden boat. the power of the web: anyone can post anything on the web the weakness of the web: anyone can post anything on the web. 07-13-2017, 03:21 pm #9..
