plywood boat chine logs
Chine log construction is a method of building hard chine boat hulls. hard chines are common in plywood hulls, while soft chines are often found on fiberglass hulls. traditional planked hulls in most cultures are built by placing wooden planks oriented parallel to the waterflow and attached to bent wooden frames.. Is the chine log fastened to the ply side at the chine? if not, consider resawing the chine log into (2) x 3/8" thick planks, and laminate them together. the laminate will be slippery enough before it cures that you can get it to conform to the curve of the chine. when it cures, it will be locked in place.. The chine log on the kh18 starts at the transom and runs all the way forward, ultimately intersecting with the stem. it’s for this reason that the keel and stem were just installed in the boat – i had to mate the chine logs to the stem, so it had to be there first. step 1: shape the stem. when the stem was installed it was a curved block of. 
plywood boat chine logs I expect the external chine logs fredrosse asked about are on a simple plywood flat bottom or v-bottom boat. during construction the sides are bent around the frames and/or mold without the chine logs in place. next the chine logs are bent around the outside of the sides and fastened in place.. Chine logs !! wow i havent heard of that exspression !! but i understand what is being refered to !! 1984 when i worked in tahiti the wood boat builder next shed to where i was used the branchs of trees that they had a great pile of all laid out and dry as a bone they had a plywood pattern of the rib shape and laid it on the branch till they found the right shape then band sawed two 1.5 inch.
