homemade small plywood boat
Building your own plywood (stitch and glue) boat is a low cost and light weight alternative to spending $10,000+ on an expensive commercially built boat that is difficult to trailer, very heavy, and guzzles gas. online research, low-cost.... Take a few sheets of marine plywood, some 2 by 4s, add a bit of imagination and a few available hours on a weekend, and you can build a plywood boat. a well-built plywood boat, with a reinforced transom on which to mount an outboard motor, can become a viable source of recreation for anyone who wants to spend some time on the water.. If you don’t need a larger boat, this could be the answer for you. it’s cost-effective because the whole thing is built from one sheet of plywood. even though this boat isn’t the biggest, it would make a great fishing boat for a one-person fishing trip. 15. zip tie and ply mini boat. 
homemade small plywood boat I put an 8 hp outboard engine on it which was fine but the boat can also take a bigger one, maybe 15 hp or so. you need about 4-5 sheets of plywood to build it. about 10mm for the bottom and 6.5. Well here is a video showing you a boat i made for under 100$.i bought all the material i used to build the boat except for a half a sheet of 3/4 plywood for the seats and deck and the paint..
